Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Prochaine révision
Révision précédente
pas_de_son_modem [Le 17/07/2008, 07:33]
jsmaster créée/ probleme son-modem
pas_de_son_modem [Le 30/01/2009, 01:36] (Version actuelle)
213.95.41.13
Ligne 1: Ligne 1:
-====== Pas de son lors de l'​installation des pilotes Connexant ======+====== Pas de son lors de l'​installation des pilotes Connexant ​avec une carte audio HDA ====== 
 + 
 +<​note>​Tutoriel non-completé en entier pour le moment</​note>​
  
 Il m'est arrivé lors de l'​installation des pilotes pour le modem Connexant de perdre le son, causé par le remplacement des pilotes alsa et d'une mauvaise compilation à cause de paquets manquants. Il m'est arrivé lors de l'​installation des pilotes pour le modem Connexant de perdre le son, causé par le remplacement des pilotes alsa et d'une mauvaise compilation à cause de paquets manquants.
Ligne 83: Ligne 85:
 available from http://​www.linuxant.com/​alsa-driver**</​code>​ available from http://​www.linuxant.com/​alsa-driver**</​code>​
  
-<note important>​L'​avertissement suivant vous averti que  le pilote sera généré sous un ancien pilote High Definition Audio, ce qui veut dire que vos compilateurs n'ont soient pas été installés, ou bien qu'il y a eu erreur lors du dépaquetage. ​ En résumé, les pilotes seront générés à partir de ce que vous possédez déjà sur votre machine. ​ Si ce message ne vous apparaît pas, cela veut dire que tout se passe dans l'​ordre.</​note>​+<note important>​L'​avertissement suivant vous averti que le pilote sera généré sous un ancien pilote High Definition Audio, ce qui veut dire que vos compilateurs n'ont soient pas été installés, ou bien qu'il y a eu erreur lors du dépaquetage. ​ En résumé, les pilotes seront générés à partir de ce que vous possédez déjà sur votre machine.  **C'​EST À CAUSE DE CETTE ERREUR QUE VOUS N'AVEZ PLUS DE SON APRÈS LE REDÉMARRAGE** ​ Il est donc très important de vérifier à ce que cela ne se produise pas.  Si ce message ne vous apparaît pas, cela veut dire que tout se passe dans l'​ordre.</​note>​ 
 + 
 +<note important>​Vous pourrez sans problème recompiler une fois vous être assurés d'​avoir tout en main.  Cela ne créera aucune erreur puisque l'​ancien paquet sera écrasé</​note>​
  
 Redémarrez votre machine et en principe le son devrait être revenu sans manipulations supplémentaires,​ tout en gardant le modem fonctionnel,​ bien entendu. Redémarrez votre machine et en principe le son devrait être revenu sans manipulations supplémentaires,​ tout en gardant le modem fonctionnel,​ bien entendu.
  
 <note tip>Si vous avez éprouvé quelques problèmes lors de la compilation et que seul le modem fonctionne, vous n'​avaez qu'à continuer plus bas dans ce tutoriel :P  Tout n'est pas perdu</​note>​ <note tip>Si vous avez éprouvé quelques problèmes lors de la compilation et que seul le modem fonctionne, vous n'​avaez qu'à continuer plus bas dans ce tutoriel :P  Tout n'est pas perdu</​note>​
 +
 +
 +===== Pilotes Linuxant =====
 +
 +<​note>​Vous pouvez vous procurez les tous derniers pilotes Linuxant ALSA à l'​adresse suivante : [[http://​www.linuxant.com/​alsa-driver]]</​note>​
 +
 +
 +
 +==== Ne pas avoir de compilateurs fonctionnels ====
 +
 +Il est tout à fait possible que vous soyez dans l'​obligation d'​utiliser les pilotes fournis par Linuxant. ​ Dans ce cas, il est encore plus important d'​avoir des compilateurs fonctionnels au risque de se retouver avec des instabilités systèmes après le dépaquetage et l'​installation. ​ Ce n'est pas irréparrable,​ par contre cela engendre un fort temps de démarrage car le système tente tout de même de compiler le reste du paquet sans en avoir la possibilité.
 +
 +Voici le résultat donné sans compilateur :
 +
 +
 +<​code>​admin@Studio:/​media/​LINUX_prog$ sudo dpkg -i alsa-driver-linuxant_1.0.16.1-1_all.deb
 +(Lecture de la base de données... 107693 fichiers et répertoires déjà installés.)
 +Préparation du remplacement de alsa-driver-linuxant 1.0.16.1-1 (en utilisant alsa-driver-linuxant_1.0.16.1-1_all.deb) ...
 +
 +Removing hsf driver from /​lib/​modules/​2.6.24-16-generic/​
 +Conexant HSF softmodem driver, version 7.68.00.09oem
 +
 +If you need assistance or more information,​ please go to:
 + http://​www.linuxant.com/​
 +
 +When reporting a problem for the first time, please send
 +us the file generated by "​hsfconfig --dumpdiag"​.
 +
 +No pre-built modules for: Ubuntu-8.04 linux-2.6.24-16-generic i686-SMP
 +
 +Trying to automatically build the driver modules...
 +(this requires a C compiler and proper kernel sources to be installed)
 +
 +Building modules for kernel 2.6.24-16-generic,​ using source directory
 +/​lib/​modules/​2.6.24-16-generic/​build. Please wait...
 +done.
 +
 +Automatically guessed region (using timezone): "​CANADA"​
 +
 +Setting region for modem unit 0: "​CANADA"​
 +
 +To change, use "​hsfconfig --region"​ or "​AT+GCI=<​T35code>"​
 +The current region can be displayed by entering "​ATI9"​ in a terminal program.
 +
 +Note: HDA support not compiled in the driver
 +
 +Note: kernel module snd-via82xx-modem overridden by hsfmc97via
 +Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
 +Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
 +
 +Current parameters: ("​hsfconfig --info"​)
 +
 +Config for modem unit 0: /​dev/​ttySHSF0
 + Device instance: 0-PCI-16ec:​2f00-16ec:​010b
 + HW revision ​   : Basic2 2.18 Standard DAA 3VoltsIA
 + HW profile name: hsfpcibasic2hsfi
 + Current region : CANADA (T.35 code: 0020)
 +
 +The /dev/modem alias (symlink) points to ttySHSF0
 +Dépaquetage de la mise à jour de alsa-driver-linuxant ...
 +Paramétrage de alsa-driver-linuxant (1.0.16.1-1) ...
 +
 +Removing hsf driver from /​lib/​modules/​2.6.24-16-generic/​
 +Building kernel modules for the 2.6.24-16-generic kernel, please wait... done.
 +ERROR: Build failed. Please review the build log at /​tmp/​alsa-driver-linuxant.12265.log
 +Conexant HSF softmodem driver, version 7.68.00.09oem
 +
 +If you need assistance or more information,​ please go to:
 + http://​www.linuxant.com/​
 +
 +When reporting a problem for the first time, please send
 +us the file generated by "​hsfconfig --dumpdiag"​.
 +
 +No pre-built modules for: Ubuntu-8.04 linux-2.6.24-16-generic i686-SMP
 +
 +Trying to automatically build the driver modules...
 +(this requires a C compiler and proper kernel sources to be installed)
 +
 +Building modules for kernel 2.6.24-16-generic,​ using source directory
 +/​lib/​modules/​2.6.24-16-generic/​build. Please wait...
 +done.
 +
 +Automatically guessed region (using timezone): "​CANADA"​
 +
 +Setting region for modem unit 0: "​CANADA"​
 +
 +To change, use "​hsfconfig --region"​ or "​AT+GCI=<​T35code>"​
 +The current region can be displayed by entering "​ATI9"​ in a terminal program.
 +
 +Note: HDA support not compiled in the driver
 +
 +Note: kernel module snd-via82xx-modem overridden by hsfmc97via
 +Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
 +Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
 +
 +Current parameters: ("​hsfconfig --info"​)
 +
 +Config for modem unit 0: /​dev/​ttySHSF0
 + Device instance: 0-PCI-16ec:​2f00-16ec:​010b
 + HW revision ​   : Basic2 2.18 Standard DAA 3VoltsIA
 + HW profile name: hsfpcibasic2hsfi
 + Current region : CANADA (T.35 code: 0020)
 +
 +The /dev/modem alias (symlink) points to ttySHSF0
 +dpkg : erreur de traitement de alsa-driver-linuxant (--install) :
 + le sous-processus post-installation script a retourné une erreur de sortie d'​état 2
 +Des erreurs ont été rencontrées pendant l'​exécution :
 + ​alsa-driver-linuxant</​code>​
 +
 +
 +Analyzez bien les retours d'​informations. ​ Vous voyez qu'il se passe quelque chose d'​anormal lors de l'​installation notament avec certains avertissements comme :
 +
 +<​code>​Removing hsf driver from /​lib/​modules/​2.6.24-16-generic/​
 +Building kernel modules for the 2.6.24-16-generic kernel, please wait... done.
 +ERROR: Build failed. Please review the build log at /​tmp/​alsa-driver-linuxant.12265.log
 +Conexant HSF softmodem driver, version 7.68.00.09oem</​code>​
 +
 +et aussi :
 +
 +<​code>​The /dev/modem alias (symlink) points to ttySHSF0
 +dpkg : erreur de traitement de alsa-driver-linuxant (--install) :
 + le sous-processus post-installation script a retourné une erreur de sortie d'​état 2
 +Des erreurs ont été rencontrées pendant l'​exécution :
 + ​alsa-driver-linuxant</​code>​
 +
 +Allons voir ce fameux build log riche en information.
 +
 +
 +<note tip>Le fichier texte généré est assez volumineux, et la plupart des informations fournises sont inutiles pour la majorité des utilisateurs mis à part peut être pour des intégrateurs. ​ Vous verrez par contre qu'il y a tout de même des choses intéressantes dans ce fichier que nous pourrons facilement interpréter.</​note>​
 +
 +
 +<​code>​rm -f .depend *.o snd.map*
 +rm -f /*.ver
 +rm -f modules/*.o modules/​*.ko
 +rm -f *~ out.txt *.orig *.rej .#* .gdb_history
 +rm -f doc/*~
 +rm -f config.cache config.log config.status Makefile.conf
 +rm -f utils/​alsa-driver.spec
 +rm -f `find alsa-kernel -name "​*~"​`
 +rm -f `find alsa-kernel -name "​*.orig"​`
 +rm -f `find alsa-kernel -name "​*.rej"​`
 +rm -f `find alsa-kernel -name "​.#​*"​`
 +rm -f `find alsa-kernel -name "​out.txt"​`
 +rm -rf autom4te.cache
 +rm -f alsa-kernel/​include/​version.h
 +rm -f include/​sound
 +rm -fr .tmp_versions
 +rm -f Module.symvers
 +checking for gcc... gcc
 +checking for C compiler default output file name... a.out
 +checking whether the C compiler works... yes
 +checking whether we are cross compiling... no
 +checking for suffix of executables... ​
 +checking for suffix of object files... o
 +checking whether we are using the GNU C compiler... yes
 +checking whether gcc accepts -g... yes
 +checking for gcc option to accept ISO C89... none needed
 +checking for ranlib... ranlib
 +checking for a BSD-compatible install... /​usr/​bin/​install -c
 +checking how to run the C preprocessor... gcc -E
 +checking for grep that handles long lines and -e... /bin/grep
 +checking for egrep... /bin/grep -E
 +checking for ANSI C header files... yes
 +checking for an ANSI C-conforming const... yes
 +checking for inline... inline
 +checking whether time.h and sys/time.h may both be included... yes
 +checking whether gcc needs -traditional... no
 +checking for current directory... /​usr/​lib/​alsa-driver-linuxant
 +checking cross compile... ​
 +checking for directory with kernel source... /​lib/​modules/​2.6.24-16-generic/​build
 +checking for directory with kernel build... ​
 +checking for kernel linux/​version.h... yes
 +checking for kernel linux/​autoconf.h... yes
 +checking for kernel version... 2.6.24-16-generic
 +checking for GCC version... Kernel compiler: ​ Used compiler: gcc (GCC) 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
 +
 +*** NO PREDEFINED KERNEL COMPILER IS DETECTED
 +*** Assuming the same compiler is used with the current system compiler.
 +
 +*** Please make sure that the same compiler version was used for building kernel.
 +
 +checking for built-in ALSA... no
 +checking for existing ALSA module... no
 +checking for Red Hat kernel... auto
 +checking for Red Hat kernel... no
 +checking for SUSE kernel... auto
 +checking for SUSE kernel... no
 +checking for CONFIG_EXPERIMENTAL... yes
 +checking for kernel linux/​config.h... no
 +Creating <​linux/​config.h>​...
 +checking to modify of kernel linux/​kmod.h... no
 +checking for kernel linux/​utsrelease.h... yes
 +checking for kernel linux/​compiler.h... yes
 +checking for kernel linux/​pm.h... yes
 +checking for kernel linux/​spinlock.h... yes
 +checking for kernel linux/​irq.h... yes
 +checking for kernel linux/​threads.h... yes
 +checking for kernel linux/​rwsem.h... yes
 +checking for kernel linux/​gameport.h... yes
 +checking for kernel media/​v4l2-dev.h... yes
 +checking for kernel linux/​devfs_fs_kernel.h... no
 +Creating a dummy <​linux/​devfs_fs_kernel.h>​...
 +checking for kernel linux/​highmem.h... yes
 +checking for kernel linux/​workqueue.h... yes
 +checking for kernel linux/​dma-mapping.h... yes
 +checking for kernel asm/​hw_irq.h... yes
 +checking for kernel linux/​device.h... yes
 +checking for kernel linux/​platform_device.h... yes
 +checking for kernel linux/​isa.h... yes
 +checking for kernel linux/​jiffies.h... yes
 +checking for kernel linux/​compat.h... yes
 +checking for kernel linux/​log2.h... yes
 +checking for kernel linux/​adb.h... yes
 +checking for kernel linux/​cuda.h... yes
 +checking for kernel linux/​pmu.h... yes
 +checking for kernel linux/​moduleparam.h... yes
 +checking for kernel linux/​syscalls.h... yes
 +checking for kernel linux/​firmware.h... yes
 +checking for kernel linux/​err.h... yes
 +checking for kernel linux/​bitmap.h... yes
 +checking for kernel linux/​mutex.h... yes
 +checking for kernel linux/​latency.h... yes
 +checking for kernel linux/​kthread.h... yes
 +checking for kernel asm/​irq_regs.h... yes
 +checking for kernel linux/​seq_file.h... yes
 +checking for kernel module symbol versions... yes
 +checking for has ioport support... yes
 +checking for PCI support in kernel... yes
 +checking for I2C driver in kernel... module
 +checking for I2C_POWERMAC in kernel... unknown
 +checking for firmware loader... yes
 +checking for input subsystem in kernel... yes
 +checking for directory to store kernel modules... /​lib/​modules/​2.6.24-16-generic/​kernel/​sound
 +checking for verbose procfs... on
 +checking for verbose printk... on
 +checking for debug level... none
 +checking for ISA support in kernel... yes
 +checking for processor type... i586
 +checking for i386 machine type... default
 +checking for ISA DMA API... yes
 +checking for SMP... yes
 +checking for Video device support in kernel... yes
 +checking for ISA PnP driver in kernel... yes
 +checking for PnP driver in kernel... yes
 +checking for Kernel ISA-PnP support... yes
 +checking for strlcpy... yes
 +checking for snprintf... yes
 +checking for vsnprintf... yes
 +checking for scnprintf... yes
 +checking for sscanf... yes
 +checking for vmalloc_to_page... yes
 +checking for old kmod... no
 +checking for PDE... yes
 +checking for pci_set_consistent_dma_mask... yes
 +checking for pci_dev_present... yes
 +checking for msleep... yes
 +checking for msleep_interrupt... yes
 +checking for msecs_to_jiffies... yes
 +checking for tty->​count is the atomic type... no
 +checking for video_get_drvdata... yes
 +checking for V4L1 layer... yes
 +checking for io_remap_pfn_range... yes
 +checking for kcalloc... yes
 +checking for kstrdup... yes
 +checking for kzalloc... yes
 +checking for create_workqueue with flags... no
 +checking for saved_config_space in pci_dev... yes
 +checking for new pci_save_state... yes
 +checking for register_sound_special_device... yes
 +checking for driver version... 1.0.16
 +checking for sequencer support... yes
 +checking for OSS/Free emulation... yes
 +checking for OSS PCM plugin system inclusion... yes
 +checking for RTC callback support in kernel... yes
 +checking for HPET support... yes
 +checking for dynamic minor numbers... no
 +checking for support of old API... yes
 +checking for Procfs support... yes
 +checking for USB support... yes
 +checking for class_simple... no
 +checking for old driver suspend/​resume callbacks... no
 +checking for removal of page-reservation for nopage/​mmap... yes
 +checking for nested class_device... yes
 +checking for new IRQ handler... yes
 +checking for gfp_t... yes
 +checking for PnP suspend/​resume... yes
 +checking for new unlocked/​compat_ioctl... yes
 +checking for x86-compatible PC... yes
 +checking for High-Res timers... yes
 +checking for kernel PCMCIA
 +checking for PCMCIA support... yes
 +checking for PC9800 support in kernel... no
 +checking for parallel port support... yes
 +checking for power management... yes
 +checking for CONFIG_HAS_DMA... yes
 +checking for which soundcards to compile driver for... all
 +configure: creating ./​config.status
 +config.status:​ creating version
 +config.status:​ creating Makefile.conf
 +config.status:​ WARNING: ​ Makefile.conf.in seems to ignore the --datarootdir setting
 +config.status:​ creating snddevices
 +config.status:​ creating utils/​alsa-driver.spec
 +
 +config.status:​ creating utils/​buildrpm
 +config.status:​ creating toplevel.config
 +config.status:​ creating utils/​alsasound
 +config.status:​ creating utils/​alsasound.posix
 +config.status:​ creating include/​pci_ids_compat.h
 +config.status:​ creating include/​i2c-id_compat.h
 +config.status:​ creating include/​config.h
 +config.status:​ creating include/​config1.h
 +config.status:​ creating include/​version.h
 +config.status:​ include/​version.h is unchanged
 +config.status:​ creating include/​autoconf-extra.h
 +if [ ! -d include/​sound -a ! -L include/​sound ]; then \
 +   ln -sf ../​alsa-kernel/​include include/​sound ; \
 + fi
 +cp -puvf include/​version.h include/​sound/​version.h
 +`include/​version.h'​ -> `include/​sound/​version.h'​
 +make dep
 +make[1]: entrant dans le répertoire « /​usr/​lib/​alsa-driver-linuxant »
 +make[2]: entrant dans le répertoire « /​usr/​lib/​alsa-driver-linuxant/​acore »
 +copying file alsa-kernel/​core/​info.c
 +/​usr/​lib/​alsa-driver-linuxant/​utils/​patch-alsa:​ 24: patch: not found
 +make[2]: *** [info.c] Erreur 1
 +make[2]: quittant le répertoire « /​usr/​lib/​alsa-driver-linuxant/​acore »
 +make[1]: *** [dep] Erreur 1
 +make[1]: quittant le répertoire « /​usr/​lib/​alsa-driver-linuxant »
 +make: *** [include/​sndversions.h] Erreur 2</​code>​
 +
 +
 +NO PREDEFINED KERNEL COMPILER IS DETECTED
 +Assuming the same compiler is used with the current system compiler.
 +Please make sure that the same compiler version was used for building kernel.
 +
 +et aussi en fin de ligne l'​erreur de niveau 2
 +
 +Cela vous dit que vous avez tenter de compiler alors que vous ne n'avez pas les compilateurs necéssaires
 +
 +----
 +Voici ce que cela donne avec les bons compilateurs installés :
 +
 +<​code>​administrateur@Studio:/​media/​LINUX_prog/​DRIVERS$ sudo dpkg -i alsa-driver-linuxant_1.0.16.1-1_all.deb
 +[sudo] password for administrateur: ​
 +Sélection du paquet alsa-driver-linuxant précédemment désélectionné.
 +(Lecture de la base de données... 109661 fichiers et répertoires déjà installés.)
 +Dépaquetage de alsa-driver-linuxant (à partir de alsa-driver-linuxant_1.0.16.1-1_all.deb) ...
 +Paramétrage de alsa-driver-linuxant (1.0.16.1-1) ...
 +
 +Removing hsf driver from /​lib/​modules/​2.6.24-16-generic/​
 +Building kernel modules for the 2.6.24-16-generic kernel, please wait... done.
 +Conexant HSF softmodem driver, version 7.68.00.09oem
 +
 +If you need assistance or more information,​ please go to:
 + http://​www.linuxant.com/​
 +
 +When reporting a problem for the first time, please send
 +us the file generated by "​hsfconfig --dumpdiag"​.
 +
 +No pre-built modules for: Ubuntu-8.04 linux-2.6.24-16-generic i686-SMP
 +
 +Trying to automatically build the driver modules...
 +(this requires a C compiler and proper kernel sources to be installed)
 +
 +Building modules for kernel 2.6.24-16-generic,​ using source directory
 +/​lib/​modules/​2.6.24-16-generic/​build. Please wait...
 +done.
 +
 +Automatically guessed region (using timezone): "​CANADA"​
 +
 +Unable to unload driver to configure region; modem in use?
 +try configuring it manually with "​AT+GCI=0020"​
 +
 +Setting region for modem unit 0: "​CANADA"​
 +
 +To change, use "​hsfconfig --region"​ or "​AT+GCI=<​T35code>"​
 +The current region can be displayed by entering "​ATI9"​ in a terminal program.
 +
 +Note: kernel module snd-via82xx-modem overridden by hsfmc97via
 +Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
 +Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
 +
 +Current parameters: ("​hsfconfig --info"​)
 +
 +Config for modem unit 0: /​dev/​ttySHSF0
 + Device instance: 0-PCI-16ec:​2f00-16ec:​010b
 + HW revision ​   : Basic2 2.18 Standard DAA 3VoltsIA
 + HW profile name: hsfpcibasic2hsfi
 + Current region : CANADA (T.35 code: 0020)
 +
 +The /dev/modem alias (symlink) points to ttySHSF0
 +
 +administrateur@Studio:/​media/​LINUX_prog/​DRIVERS$</​code>​
 +
 +
 +<​note>​Section a completer</​note>​
 +
 +
 +
  
  
Ligne 93: Ligne 496:
  
  
 +//​Contributeurs : [[:​utilisateurs:​jsmaster]].//​ - Jean-Simon Chénard
  • pas_de_son_modem.1216272813.txt.gz
  • Dernière modification: Le 18/04/2011, 14:48
  • (modification externe)