Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
aticonfig [Le 15/07/2008, 16:54]
Canigou 66 l'ecran > l'écran, Tout les logiciels > Tous les logiciels
— (Version actuelle)
Ligne 1: Ligne 1:
-{{tag>​matériel carte_graphique ati}} 
----- 
  
- 
- 
- 
-====== Les options pour bien configurer votre Ati ====== 
- 
-<​note>​Depuis la version 8.21.7 des drivers propriétaires Ati (fglrx) la commande de configuration classique //​fglrxconfig//​ a été remplacée par //​aticonfig//</​note>​ 
- 
-<​note>​Il est aussi possible de passer par le menu Applications/​Accessoires/​Catalyst pour atteindre l'​interface graphique du panneau de contrôle Catalyst. Celui-ci vous permettra de configurer aisément le pilote ATI. Disponible depuis la version 7.12 (Décembre 2007).</​note>​ 
- 
-===== aticonfig ===== 
- 
-Pour afficher la liste des options tapez : 
-<​code>​$ aticonfig 
-Usage: aticonfig [OPTION] ... 
-Parses an existing X-Server configuration file and modifies it to 
-operate with ATI products. 
-The following command-line options can be invoked as parameters: (...)</​code>​ 
- 
-Finalement le mode-question pour configurer le //​xorg.conf//​ a disparu au profit d'une suite de commandes à associer à une option permettant de le modifier sans douleur ou jonglage. Et mieux, d'y revenir rapidement, à la demande. 
-C'est dans ce dernier fichier que vous enregistrerez les réglages de votre ServeurX (interface graphique nommée le //GUI//) 
-Il se trouve ici : //​etc/​X11/​xorg.conf//​ 
- 
-==== Configuration initiale nécessaire et suffisante du pilote ATI ==== 
- 
-Les options : 
- 
-<​code>​--initial 
-        Generate a default ATI device section in the configuration 
-        file which is capable of loading the fglrx driver. 
- 
---initial=dual-head 
-        Same as '​--initial'​ but generate a basic dual head 
-        configuration file.</​code>​ 
- 
-Exemple la commande //$ sudo aticonfig --initial=dual-head//​ met en place une config Dual Screen. Voilà, vous avez compris. Même chose pour la suite. 
- 
-Note : pour les adeptes du vrai Dual Screen, lancez plutôt : 
-<​code>​$ sudo aticonfig --dtop=horizontal --overlay-on=1</​code>​ 
-Cette commande est spécifiée par Ati en guise d'​exemple en bas de page (Big Desktop) 
-Pour que vous puissiez voir les effets, il vous faut reseter le serveurX avec [Ctrl] + [Alt] + [Backspace]... (faîtes vos sauvegardes avant) 
-Si vous tombez en mode console rebootez l'ordi complétement. 
- 
- 
-==== TV Options ​ ==== 
-<​code>​--tvf,​ --tv-format-type=STRING 
-        Change the TV signal format. STRING can be one of: 
-        NTSC-M 
-        NTSC-JPN 
-        PAL-B 
-        PAL-D 
-        PAL-G 
-        PAL-H 
-        PAL-I 
-        PAL-K 
-        PAL-K1 
-        PAL-L 
-        PAL-M 
-        PAL-N 
-        PAL-CN 
-        PAL-SCART</​code>​ 
-Permet de choisir le standart télé en fonction du pays. 
- 
-<​code>​ 
-        PAL-B : en Belgique, Danmark, Finland, Allemagne, 
-                        Guinée, Hong Kong, Inde, Indonesie, 
-                        Italie, Malaysie, Les Pays Bas, Norvège, 
-                        Portugal, Singapoure, Espagne, Suède, 
-                        et Suisse 
-        PAL-D : en Chine and Corée du Nord 
-        PAL-G : au Danmark, Finland, Allemagne, Italie, 
-                        Malaysie, Les Pays Bas, Norvège, Portugal, 
-                        Espagne, Suède, et Suisse 
-        PAL-H : en Belgique 
-        PAL-I : à Hong Kong et au Royaume Uni 
-        PAL-K1 : en Guinée 
-        PAL-M : au Brézil 
-        PAL-N : en France, Paraguay, et Uruguay 
-        PAL-NC : en Argentine 
-        NTSC-J : au Japan 
-        NTSC-M : au Canada, Chili, Colombie, Costa Rica, 
-                        Ecuador, Haiti, Honduras, Mexique, Panama, 
-                        Porto Rico, Corée du Sud, Taiwan, USA, 
-                        et Venezuela</​code>​ 
- 
-<​code>​--tvs,​ --tv-standard-type=STRING 
-        Change the TV standard for TV output. STRING can be one of: 
-        VIDEO 
-        SCART 
-        YUV 
-</​code>​ 
- 
-La fonction overscan (plein écran ou surbalayage de l'​écran pour virer les bandes noires sur votre tv) enfin disponible dans la dernière version des drivers offficiels. 
-<​code>​ 
- ​--tv-overscan={on|off} 
-       ​Enable or disable overscan mode for TVout 
-       Note, not all tv-formats support overscan. Try to 
-       ​toggle overscan off before changing tv-format if 
-       and error occurs. 
-</​code>​ 
- 
-Donne des infos sur votre tv. 
-<​code>​ 
- ​--tv-info 
-         Print out the current tv geometry, tv format, and if the 
-         tv is physically connected. 
-</​code>​ 
- 
-Options pour les cartes FireGL Workstation : 
-<​code>​ 
---app, --use-app-profile=STRING 
-        Change the application profile for a FireGL workstation board. 
-        STRING can be one of: 
-        default 
-        maya 
-        softimage-xsi 
-        softimage-3d 
-        houdini4.0 
-        houdini5.0 
-        houdini5.5</​code>​ 
- 
-Cette commande permet d'​optimiser les paramètres de votre machine pour des applications 3d spécifiques. Tous les logiciels qui suivent sont des logiciels de 3d. Maya par exemple à servi pour l'​épisode 3 de Star Wars 
-Exemple : 
-<​code>​$ sudo aticonfig --use-app-profile=maya</​code>​ 
- 
-<​code>​ 
---dw, --disable-workstation=STRING 
-        Disable a FireGL workstation board feature. STRING can be one of: 
-        all 
-        timmo 
-        timmo-extreme</​code>​ 
- 
-==== FSAA Options ==== 
-<​code>​ 
---fsaa={on|off} 
-        Enable/​disable full scene anti-aliasing. Enable this option 
-        to enhance photo-realism in 3D rendering. Disable it to get 
-        the most accurate 3D image. 
-</​code>​ 
- 
-Cette option permet d'​activer l'​anti-aliasing des cartes 3d. 
-Dans les faits, la carte graphique lisse les contours des objets 3d pour permettre de diminuer l'​effet de crénelage 
- 
-<​code>​--fs,​ --fsaa-samples={off,​0,​2,​4,​6} 
-        Set the number of FSAA samples per pixel or 2, 4, 6. off is 
-        the same as setting 0 samples. 
-</​code>​ 
- 
-Cette option détermine le taux de lissage que vous voulez appliquer à votre objets 3d 
-Plus le chiffre est grand plus, plus l'​image seras douce, mais on va aussi plus demander de ressources à la carte graphique. 
-**Petites cartes s'​abstenir...** 
- 
-<​code>​ 
---fsg, --fsaa-gamma={on|off} 
-        Enable/​disable FSAA gamma. 
-</​code>​ 
- 
-Activer le gamma permet de corriger un defaut de beaucoup de moniteur. 
-Je vous conseille de l'​activer,​ ou tout au moins de le tester, surtout si vous etes équipé de CRT 
-Si vous êtes infographiste,​ ou comptez le devenir, il est important de connaître, ce qu'est [[http://​www.profil-couleur.com/​pp/​204-gamma-ecran.php|une courbe de gamma]]. 
- 
-<​code>​ 
---fmsp, --fsaa-ms-positions=x0,​y0,​x1,​y1,​x2,​y2,​x3,​y3,​x4,​y4,​x5,​y5 
-        Change the FSAA Multi-Sample Positions for x0,y0 to x5,y5. You must 
-        specify exactly 12 real number values separated by commas. 
-</​code>​ 
- 
- 
-==== Options relatives aux écrans ==== 
- 
-<​code>​ 
---ovt, --overlay-type=STRING 
-        Change the overlay for the X server. STRING can be one of: 
-        opengl 
-        Xv 
-        disable 
- 
---ovon, --overlay-on={0|1} 
-        Choose which head the hardware overlay should be visible on. The 
-        hardware overlay can be used for either OpenGL, video, 
-        pseudo-color or stereo. 
- 
---lcd, --lcd-mode=STRING 
- 
-        Change the LCD mode. STRING can be one of: 
-        center 
-        full 
-</​code>​ 
- 
-<​code>​ 
-aticonfig --desktop-setup= horizontal 
-    --dtop, --desktop-setup=STRING 
- 
-        Change the desktop setup for multiple display adapters. 
-        STRING can be one of: 
- 
-            single           1 screen, second dark 
-            mirror ​               2 screens - same content, identical 
-                                 ​refresh rate/​resolution 
-            clone           2 screens - same content, allows for 
-                                  different refresh rates/​resolutions 
-            horizontal ​           2 screens - one framebuffer,​ 
-                                  screen 1 right of screen 0 
-            horizontal,​reverse   2 screens - one framebuffer,​ 
-                                  screen 1 left of screen 0 
-            vertical           2 screens - one framebuffer,​ 
-                                  screen 1 above of screen 0 
-            vertical,​reverse   2 screens - one framebuffer,​ 
-                                  screen 1 below of screen 0 
- 
-            Note: This option is not valid if '​--initial=dual-head'​ is specified.</​code>​ 
- 
-Permet de gérer l'​organisation de écrans les uns par rapport aux autres. 
- 
-<​code>​ 
---vs, --sync-vsync={on|off} 
-            Enable/​disable sync buffer swaps with vsync. 
-            Enable this option to prevent tearing during 3D rendering. 
-</​code>​ 
-Si vous possédez un écran LCD, évite l'​effet d'​escalier dans les jeux de type FPS. 
- 
-<​code>​ 
---psc, --pseudo-color={on|off} 
-            Enable/​disable pseudo-color visuals. Enable this option 
-            to get 16-bit color support. 
- 
---stereo={on|off} 
-            Enable/​disable quad-buffer stereo support. 
-            Enable this option only for using applications 
-            that support the use of hardware 3D shutter glasses. 
- 
---ss, --stereo-sync={on|off} 
-            Enable/​disable quad-buffer stereo sync. Enable this option to get 3D 
-            glasses to synchronize with the infrared transmitter. 
- 
---resolution=W1xH1,​W2xH2,​W3xH3,​... 
-            Set the modes for the first screen. You may specify several 
-            resolutions separated by commas. 
- 
---hsync=LOW-HIGH 
-            Change the horizontal sync range of the first monitor. 
-            Make sure you know the capabilities of your monitor before changing this option. 
- 
---vrefresh=LOW-HIGH 
-            Change the vertical refresh range of the first monitor. 
-            Make sure you know the capabilities of your monitor before 
-            changing this option. 
- 
---resolution2=W1xH1,​W2xH2,​W3xH3,​... 
-            Change the modes for the second screen for dual head. 
-            You may specify several resolutions separated by commas. 
-            Note: The secondary screen must exist. 
- 
---hsync2=LOW-HIGH 
-            Change the horizontal sync range of the second display. 
-            Make sure you know the capabilities of your monitor 
-            before changing this option. 
- 
---vrefresh2=LOW-HIGH 
-            Change the vertical refresh range of the second display. 
-            Make sure you know the capabilities of your monitor 
-            before changing this option. 
- 
---mode2=W1xH1,​W2XH2,​W3xH3,​... 
-            Change the modes for the second display. 
-            You may specify several resolutions separated by commas. 
-            Only valid for clone and big desktop settings. 
-</​code>​ 
-<​code>​ 
---screen-layout={left|right|above|below} 
-            Set the secondary screen position for dual head. 
- 
-</​code>​ 
-Change l'​ordre de disposition des écrans 
- 
-<​code>​ 
---screen-overlap=NUM 
-             Set the screen overlap region in big desktop mode 
-             to be NUM pixels. 
-</​code>​ 
-L'​oververlapping permet, quand on veut maximiser un fenetre de la répatir sur les deux ècrans. Je vous déconseille de l'​activer,​ ça pose des problemes pour l'​affichage des vidéos plein écran 
- 
-<​code>​--force-monitor=STRING[,​STRING...] 
- 
-              Describe all displays that are to be enabled and/or 
-              disabled regardless of physical connection. 
-              STRING can be one or more of the following set, 
-              separated by commas: 
-                crt1 
-                crt2 
-                lvds 
-                tv 
-                tmds1 
-                tmds2 
-                tmds2i 
-                nocrt1 
-                nocrt2 
-                nolvds 
-                notv 
-                notmds1 
-                notmds2 
-                notmds2i 
-</​code>​ 
-Permet d'​activer ou désactiver les différentes connections physiques 
-crt1, et crt2 pour activer les sorties écrans 1 et 2. 
-nocrt1, et nocrt2 pour désactiver les sorties écrans 1 et 2. 
-tv pour la sortie tv etc... 
- 
- 
-==== Powerplay Options ==== 
- 
-<note important>​ seulement sur les mobility, permet de regler les differents mode de la carte afin de baisser ou d'​augmenter sa frequence, ​ exemple, sur mobility x1800  je possede trois mode : eco / defaut et perf  qui font respectivement a glxgears ​ : 3000 / 5500 / 8500. </​note>​ 
- 
-<​code>​ 
---lsp, --list-powerstates 
-              Print information about power states and exit. 
- 
---set-powerstate=NUMBER 
-              Set a power state listed by --list-powerstates. 
-</​code>​ 
- 
-==== Advanced Options ==== 
- 
-<​code>​ 
---tls={on|off} 
-              Enable/​disable fast thread local storage. 
-              Disable this option when virtual machines or 
-              WineX fail to work properly. 
- 
---sb, --signal-block={on|off} 
- 
-              Enable/​disable signal blocking. Disable this option when debugging a 
-              multi-threaded OpenGL application. 
- 
---iagp, --internal-agp={on|off} 
- 
-               ​Enable/​disable internal AGP gart. Enable this option to use the ATI 
-               AGP GART module. Disable it to use the module included with the Linux 
-               ​kernel. Changing this option may help resolve display-related issues. 
- 
---agpl, --agp-locked-userpages={on|off} 
- 
-               ​Enable/​disable AGP locked user pages. Disable this option if the system 
-               hangs when running fgl_glxgears. 
- 
---gcpu, --generic-cpu={on|off} 
- 
-               ​Enable/​disable generic CPU. Use this option if the CPU is being 
-               ​reported improperly. For example: If you have an AMD cpu that is 
-               being reported as Intel. 
-</​code>​ 
- 
-==== Miscellaneous Options ==== 
- 
-<​code>​ 
--v, --verbose 
-              Show what aticonfig is doing. 
- 
--q, --quiet 
-              Disable all information output except for errors. 
- 
---effective={now,​startup} 
-              Choose when the requested changes should take effect. 
- 
-              now: Immediately. This change will affect the running X 
-              session if applicable. Only '​set-powerstate'​ and 
-              '​overlay-on'​ are applicable for now. 
-              startup: On future X server startups. This change will modify the 
-              X server configuration file if applicable. 
-              The default is '​now,​startup',​ i.e., do both as applicable. 
- 
--i, --input=FILE 
-               ​Select a FILE to input as the configuration file. Set FILE to '​-'​ to 
-               pipe from standard input. Without this option, aticonfig will search 
-               /​etc/​X11 for the default configuration file. 
- 
--o, --output=FILE 
-                Select a FILE to output the new configuration file to. Set FILE to '​-'​ 
-                to print to standard output. Without this option, aticonfig will 
-                replace the input file with the newly generated file. 
- 
--h, --help 
-                Display this help screen. 
- 
--f, --force 
-                Only valid with '​initial'​ option. Force aticonfig to generate default 
-                Monitor, Device, and Screen sections even if the original configuration 
-                file has invalid settings in these sections. 
- 
-</​code>​ 
- 
- 
-===== Les exemples ===== 
- 
-<​code>​ 
-1. Setting up fglrx for the first time. 
- 
-Single head : aticonfig --initial 
-                --input=/​etc/​X11/​xorg.conf 
----- 
-Dual head : aticonfig --initial=dual-head --screen-layout=above 
-            This command will generate a dual head configuration 
-                file with the second screen located above the first 
-                screen. 
-2. Setting up big desktop to horizontal and set overlay on secondary display. 
-                aticonfig --dtop=horizontal --overlay-on=1 
- 
-3. Setting up modes for primary display. 
-                aticonfig --resolution=1600x1200,​1280x1024,​1024x768 
- 
-4. Force primary CRT on and TV-out off. 
-                aticonfig --force-monitor=crt1,​notv 
-</​code>​ 
- 
-===== Liens ===== 
-  *  N'​hésitez pas à joindre Ati pour rapporter d'​éventuels bugs : http://​support.ati.com 
-  *  Retourner à la page [[:​materiel#​ati]] ;-) 
- 
----- 
-//​Contributeurs : Traduit à partir de l'aide Ati et enrichi par [[utilisateurs:​kao_chen]],​ Restructuré par [[utilisateurs:​urss]]//​ 
  • aticonfig.1216133644.txt.gz
  • Dernière modification: Le 15/07/2008, 16:59
  • (modification externe)